1332.6410.54

Direct source and receiver access for R&SZNA50 (4 ports), Upgrade- option, consists of R&SZNA50-B16 and cable set for installation. Retrofit in Rohde & Schwarz service center (Hardware option).

PN:[ZNA50-U16]

Open Market/ 22 Weeks

1326.5996.02

Noise Source Control Output 0/28V (hardware option)

PN:[FPS-B28V]

Open Market/ 22 Weeks

1319.5736.11

Changes port 1 to 3.5mm(m), for calibration unit R&SZN-Z51 Var72/74 (hardware option)

PN:[ZNZ51-B131]

Open Market/ 22 Weeks

1319.5088.02

PCIe and Direct CTRL interface (hardware option)

PN:[ZNB-B12]

Open Market/ 22 Weeks

1319.5871.13

Option for calibration unit R&SZN-Z51 Var. 72/74 changes port 3 to connector 4.3-10, female, 100 kHz - 8.5 GHz (hardware option)

PN:[ZNZ51-B340]

Open Market/ 22 Weeks

1332.5113.51

Direct source monitor access for port 1 before the source step attenuator for R&SZNA67 (Hardware option, requires R&SZNA67-B16 and R&SZNA67-B21) (B-option ex factory only, ZNAxx-Uxxx for retrofit: ZNAxx-U161 retrofit for 2-port ZNA only. ZNAxx-U163...

PN:[ZNA67-B161]

Open Market/ 22 Weeks

1304.0427.02

Second hard disk for R&SFPL1000, premounted on PC-board, with DVI monitor connector, including analyzer Firmware, for exchange against standard hard drive (hardware option)

PN:[FPL1-B19]

Open Market/ 22 Weeks

1319.4230.02

Adds ports 17 to 20, R&SZNBT8-B108 and R&SZNBT8-B112 and R&SZNBT8-B116 required, retrofitting just in service possible (hardware option)

PN:[ZNBT8-B120]

Open Market/ 22 Weeks

1319.4323.02

Receiver step attenuators for ports 5 to 8 (hardware option)

PN:[ZNBT8-B362]

Open Market/ 22 Weeks

1319.4330.02

Receiver step attenuators for ports 9 to 12 (hardware option)

PN:[ZNBT8-B363]

Open Market/ 22 Weeks

1319.4346.02

Receiver step attenuators for ports 13 to 16 (hardware option)

PN:[ZNBT8-B364]

Open Market/ 22 Weeks

1332.9348.34

Extended Power Range down to -60dBm for R&SZNBT26, ports 1 to 4 (Hardware Option)

PN:[ZNBT26-B21]

Open Market/ 22 Weeks

1210.7606.02

R&SCMW100 Hardware Kit 1, including Test Head H10C, power supply, USB 3.0 cable 3m (selection)

PN:[CMW-PS10]

Open Market/ 22 Weeks

1334.3860.02

Additional removable SSD 512 GB (including firmware) for R&SZNB with LPW11 and Win10 Operating System (hardware option)

PN:[ZNB-B19]

Open Market/ 22 Weeks

1335.8988.02

Mixed signal, max. 400 MHz, 2.5GSa/s, 16 channels, 100MSa per channel, for R&SRTM3002 and R&SRTM3004 oscilloscopes, (hardware option)

PN:[RTM-B1]

Open Market/ 22 Weeks

1319.4969.32

Additional test ports 13-18,2 VNA ports, for R&SZN-Z84 Matrix Base Unit (hardware option) requires ZN-Z84-B22 (integration ex factory or in service)

PN:[ZN-Z84-B32]

Open Market/ 22 Weeks

1319.4969.34

Additional test ports 13-18,4 VNA ports, for R&SZN-Z84 Matrix Base Unit (hardware option) requires ZN-Z84-B24 (integration ex factory or in service)

PN:[ZN-Z84-B34]

Open Market/ 22 Weeks

1319.4369.02

Receiver step attenuators for ports 21 to 24 (hardware option)

PN:[ZNBT8-B366]

Open Market/ 22 Weeks

1322.9800.26

Cross correlation for phase noise analyzer R&SFSWP26 from 1 MHz to 26 GHz (hardware option)

PN:[FSWP-B60]

Open Market/ 22 Weeks

1322.9874.10

Solid state drive >= 480GB for R&SFSWT including instrument firmware as replacement for original Windows 10 SSD (hardware option)

PN:[FSWT-B18]

Open Market/ 22 Weeks

1332.9354.44

Extended Power Range down to -60dBm for R&SZNBT40, ports 5 to 8 (Hardware Option)

PN:[ZNBT40-B22]

Open Market/ 22 Weeks

1332.9360.34

Extended Power Range down to -60dBm for R&SZNBT26, ports 9 to 12 (Hardware Option)

PN:[ZNBT26-B23]

Open Market/ 22 Weeks

1332.9360.44

Extended Power Range down to -60dBm for R&SZNBT40, ports 9 to 12 (Hardware Option)

PN:[ZNBT40-B23]

Open Market/ 22 Weeks

1319.5720.12

Changes port 2 to 3.5mm(f), for calibration unit R&SZN-Z51 Var72/74 (hardware option)

PN:[ZNZ51-B230]

Open Market/ 22 Weeks

1323.1877.02

DC Power supply for 12/24 V supply voltage, plug-in unit (hardware option)

PN:[FPL1-B30]

Open Market/ 22 Weeks

1210.7606.12

R&SCMW100 Hardware Kit 2, including Test Head H10C, power supply, USB 3.0 cable 2 (selection)

PN:[CMW-PS10]

Open Market/ 22 Weeks

1319.4969.44

Additional test ports 19-24,4 VNA ports, for R&SZN-Z84 Matrix Base Unit (hardware option) requires ZN-Z84-B34 (integration ex factory or in service)

PN:[ZN-Z84-B44]

Open Market/ 22 Weeks

1323.1883.02

Additional interfaces: User port, noise source control, power sensor, IF/video/demod out, AF output, plug-in unit (hardware option)

PN:[FPL1-B5]

Open Market/ 22 Weeks

1323.2938.02

Additional removable solid state disk for R&SZNL, premounted on PC-board, including analyzer Firmware, for exchange against standard hard drive (hardware option)

PN:[ZNL-B19]

Open Market/ 22 Weeks

1332.4646.23

Source step attenuator for port 3, mechanical, 70 dB in 10 dB steps for R&SZNA43 (B-option ex factory only, ZNAxx-Uxx for retrofit) (Hardware option)

PN:[ZNA43-B23]

Open Market/ 22 Weeks

1331.6916.14

Extension to 2000 MHz signal analysis bandwidth retrofittable in Rohde & Schwarz Service (hardware option)

PN:[FSW-B2001]

Open Market/ 22 Weeks

1345.3108.29

RF Preamplifier, 30 dB 100 kHz to 26.5 GHz for R&SFSMP26AF option R&SFSMP-B1 required (hardware option)

PN:[FSMP-B24]

Open Market/ 22 Weeks

1322.9900.27

Signal source for additive phase noise measurement, model dependent 10 MHz to max. 18 GHz, 0.1 dB steps requires R&SFSWP-B60 or R&SFSWP-B61 (hardware option)

PN:[FSWP-B64]

Open Market/ 22 Weeks

1322.9874.02

Solid state drive 480GB, with receiver firmware, as replacment for standard SSD (hardware option)

PN:[FSWT-B18]

Open Market/ 22 Weeks

1316.3555.12

Solid state drive for R&SESR with Windows 7 including instrument firmware, replaces standard hard disk (hardware option)

PN:[ESR-B18]

Open Market/ 22 Weeks

1325.3719.08

Cross correlation for phase noise analyzer R&SFSWP8 from 1 MHz to 8 GHz Low phase noise, includes R&SFSWP-B4, excludes option R&SFSWP-B60 (hardware option)

PN:[FSWP-B61]

Open Market/ 22 Weeks

1325.3725.08

RF Preamplifier, 30 dB 100 kHz to 8 GHz for R&SFSWP8 option R&SFSWP-B1 required (hardware option)

PN:[FSWP-B24]

Open Market/ 22 Weeks

1316.3555.14

Solid state drive for R&SESR with FMR11-CPU including instrument firmware, replaces standard hard disk (hardware option)

PN:[ESR-B18]

Open Market/ 22 Weeks

1316.3555.20

Spare SSD for R&SESR3/7/26 (FMR11) with receiver firmware and Windows 10 (IoT Enterprise 2019 LTSC) (hardware option)

PN:[ESR-B18]

Open Market/ 22 Weeks

1331.8019.26

Upgradekit for R&SESW-B21 option for R&SESW26 LO/IF connections for external mixers retrofittable in Rohde&Schwarz service (hardware option)

PN:[ESW-U21]

Open Market/ 22 Weeks

1332.4575.02

MIPI RF Front-End (RFFE) and General-Purpose Input/Output (GPIO) interface for R&SZNA (Hardware option)

PN:[ZNA-B15]

Open Market/ 22 Weeks

1332.4598.02

Direct IF access for R&SZNA (Hardware option)

PN:[ZNA-B26]

Open Market/ 22 Weeks

1332.4600.03

Additional removable SSD for R&SZNA. With Windows 10 2021 Operating System. (hardware option)

PN:[ZNA-B19]

Open Market/ 22 Weeks

1331.6400.14

Extension to 1200 MHz signal analysis bandwidth retrofittable in Rohde & Schwarz Service (hardware option)

PN:[FSW-B1200]

Open Market/ 22 Weeks

1340.3939.02

Physical server hardware (three redundant servers) Includes K501 - virtual server image for three instances: operating system and server software package Centralized management solution for the security scanners from Rohde & Schwarz Provides a web...

PN:[QPS-K502]

Open Market/ 22 Weeks

1332.9348.44

Extended Power Range down to -60dBm for R&SZNBT40, ports 1 to 4 (Hardware Option)

PN:[ZNBT40-B21]

Open Market/ 22 Weeks

1325.3719.26

Cross correlation for phase noise analyzer R&SFSWP26 from 1 MHz to 26 GHz Low phase noise, includes R&SFSWP-B4, excludes option R&SFSWP-B60 (hardware option)

PN:[FSWP-B61]

Open Market/ 22 Weeks

1325.3725.26

RF Preamplifier, 30 dB 100 kHz to 26 GHz for R&SFSWP26 option R&SFSWP-B1 required (hardware option)

PN:[FSWP-B24]

Open Market/ 22 Weeks

1331.7006.04

Extension from 80/160/320/512 MHz to 1200 MHz signal analysis bandwidth excludes real-time functionality (retrofit in service) (hardware option)

PN:[FSW-U1200]

Open Market/ 22 Weeks

1422.5205.02

Frequency Range: 8 kHz - 6 GHz not installable post factory (hardware option)

PN:[SMBB-B106]

Open Market/ 22 Weeks